Large Capacity Multiple Effect Evaporator MVR System for Waste Water Treatment
Brief introduction
Mechanical vaporization re-compression system, which is called MVR which principle is to compress the second steam generated by evaporator by high efficiency steam compressor; this process transfers electric energy to heating energy and higher the pressure and temperature of second steam. The second steam with higher temperature will be sent to evaporation room to heat the product for evaporation. So the latent heat of vaporization of the second steam can be circularly used. Making use of less energy which is the mechanical energy of compressor blade wheel as the compression heat pump, energy is added into the heating medium and is circularly used in heating process. Under this circumstance, no need to add first steam as heating medium.
Working principle
Compress secondary steam by using steam centrifugal compressor or other steam compression device to make sure its physical properties meet with the requirements for heating steam ; evaporation that uses it as heating steam only requires fresh steam supply when the machine is started. After entering normal operation, there is no need to supply new steam and no (or very little) secondary steam needs condensation. Therefore MVR evaporation substantially cuts down steam demand but consumes more power.
Multi-effect evaporation steam consumption
| Effective number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| Steam consumption (t steam/ t water) | ~1.04 | ~0.53 | ~0.36 | ~0.28 | ~0.23 | ~0.19 | ~0.17 | ~0.15 |
Main characteristics
1) Main driven power of MVR evaporation system is electric energy. Electric energy transfer to mechanical energy and improve the quality of second steam which is more economic than produce or purchase fresh steam.
2) Under most of the evaporation process, system no need fresh steam during operation. Only need some steam compensation for pre-heating the raw material when heat energy from product discharged or mother liquid cannot be recycled due to process requirement.
3) No need independent condenser for second steam condensation, so no need circulating cooling water. Water resource and electric energy will be saved.
4) Compared with traditional evaporators, MVR evaporator temperature difference is much smaller, can achieve moderate evaporation, greatly improve product quality and reduce fouling.
5) Evaporation temperature of system can be controlled and very suitable for evaporation an concentration of thermal sensitive product.
6) Lowest energy consumption and operation cost,electricity consumption of one ton water's evaporation is 2.2ks/C.
Our service
About us
Jiangsu Hanpu Mechanical Technology Co., Ltd. is a company mainly produce pillow plate and its related products,The company's production base is located in the Huangqiao Industrial Zone of Taixing, covering an area of 300 acres. The companies involved are in the industry of new material, new energy, medicine, chemical, environmental protection, food, and beverage, etc.
Product Tags:
|
|
Wastewater Multiple Effect Evaporation System 5T/H Mechanical Vapor Recompression Evaporator Images
|
